Just like when looking for directions on how to tint car windows, you also need to follow a step-by-step instruction when removing car tint films. Removing car window tinting films can be time-consuming since most films are constructed of two tinted polyester layers, making it harder to remove the entire layer without leaving the second layer behind.
There are two common symptoms of a dying car window tint film. This includes the purple and bubbling films. A purple film is caused by the breaking down of non-metallic dyes in the car tinting film which results it to change color. The bubbling film, on the other hand, is a sign that the film’s adhesive is starting to fail. Once a single bubble appears, expect that many more will follow. Try not to attempt removing the film by simply peeling of the sticker since you will most likely end up with a sticky mess. There are a number of effective methods in removing the tint film in your car.
These techniques are designed to ensure that you will properly scrape off all the tint films on your car window with ease and precision. However, results will of course vary depending on how you carefully followed the instructions. Many opt to remove the car tint films by themselves since letting a professional do the job will definitely cost you more. Professionally removing car window tints almost cost the same with tint a car service. Therefore, to get greater savings choose the appropriate removing technique that is applicable for you.
Remember that patience is required during the removal of car tint films. Completely removing all the automotive tint films need time thus you have to pick a day where you can allot all of your time only for removing the tints. The first technique you should consider is the ammonia and sun method. When using this technique, you need to ensure that you will be working under a bright sunny day. You will need two black garbage bags, ammonia, film scraper and paper towel.
Another effective technique is the heat method. This is a good alternative if you are expecting a cloudy day or you do not want to use razor blades and ammonia. With the heat method, you would need a clothing steamer, which cost around $25, to prep the tint films for peeling. If you do not have clothing steamer, you can use either a hair dryer or heat gun but use them appropriately since they produce more heat than the cloth steamer. Other effective peeling techniques to consider include the duct tape method as well as the soaking and soaping method. Carefully choose the peeling method according on what will work best on your automotive tints as well as on your working conditions!
